Home About us Product Project achievement Make strength Contact us Chinese Edition
                                  Home > Product > Ball mill|PMG series high efficient ball mill
                                  Ball mill|PMG series high efficient ball mill

                                        

                                   

                                        Model PMG series high efficient ball mill have been designed with the merits of open circuit grinding system and important renovations on traditional ball mills. Besides they have all the good advantages of open circult mills,production capacity has been raised substantially, product becomes super fine and blains have been increased.It has provided a new type of grinding equipment for producing high strength grade cement with high output and super finess.
                                          Model PMG ball mill has adopted special intergrate diaphragm and discharge grate to adjust material levels of every chamber so as to increase air ventilation and improve conditions inside mill; meanwhite it has also used new type of lining plate ,regulated mill rotation speed, optimized design of bearings so as to increase its operational stability,use life and grinding efficiency.
                                          After being put into practice, it is proved that its output has been increased about 20% and unit product power consumption has been reduced 10%-12% down under the conditions that other parameters have not been changed by comparison to other same sized ball mill. White being operated in open circuit, specific surface of cement could be reached up to 320cm2/kg Performance of it is up to national advanced standard .It has been awarded as well-known Brand Product of China Buliding Material Machinery Industry, "Well know Brand Products"," Appointed Manufacture of National Building Material Machinery Industry" and etc.
                                  cement mill
                                  Specification
                                  (D×L)
                                  Rotary
                                  speed
                                  (r/min)
                                  Feed size(mm)
                                  capacity
                                  (t/h)
                                  Loading capacity of grinding medium
                                  (t)
                                  Main motor
                                  Main reducer
                                  weight
                                  (t)
                                  Model
                                  Power
                                  (kw)
                                  Rotary speed
                                  (r.p.m)
                                  Model
                                  Speed
                                  ratio
                                  φ2.2×11
                                  20.91
                                  ≤25
                                  15~17
                                  50
                                  TR1512-8
                                  570
                                  740
                                  Zd80
                                  5.6
                                  92
                                  φ2.4×8
                                  20.91
                                  ≤25
                                  14~18
                                  39.5~42
                                  TRQ1512-8
                                  570
                                  740
                                  Zd80-9
                                  5
                                  76.4
                                  φ2.4×9
                                  20.91
                                  ≤25
                                  closed 23~25
                                  50
                                  TR1512-8
                                  570
                                  740
                                  Zd80-9
                                  5
                                  91
                                  φ2.4×10
                                  20.91
                                  ≤25
                                  16~22
                                  50
                                  TR1512-8
                                  570
                                  740
                                  Zd80-9
                                  5
                                  111
                                  φ2.4×11
                                  21
                                  ≤25
                                  open 19~24
                                  closed 22~28
                                  6265
                                  YR710-8/1180
                                  710
                                  740
                                  JDX630
                                  5.6
                                  125
                                  φ2.4×12
                                  21
                                  ≤25
                                  open18~20
                                  closed21~23
                                  6365
                                  YR800-8/1180
                                  800
                                  740
                                  MBY710
                                  6.3
                                  127
                                  φ2.4×13
                                  21
                                  ≤25
                                  open21~22
                                  closed24~26
                                  6668
                                  YR800-8/1180
                                  800
                                  740
                                  MBY710
                                  6.3
                                  131
                                  φ2.6×10
                                  20.6
                                  ≤25
                                  21~24
                                  64
                                  YR800-8/1180
                                  800
                                  740
                                  JDX710
                                  6.3
                                  140
                                  φ2.6×13
                                  20.6
                                  ≤25
                                  28~31
                                  81
                                  YR1000-8/1180
                                  1000
                                  740
                                  JDX800
                                  6.3
                                  158
                                  φ3.0×9
                                  19.13
                                  ≤25
                                  40~45
                                  85
                                  YR1000-8/1180
                                  1000
                                  740
                                  MBY800
                                  7.1
                                  148
                                  φ3×11
                                  18.92
                                  ≤25
                                  44~47
                                  95
                                  YR1250-8/1430
                                  1250
                                  740
                                  JDX900
                                  7.1
                                  177
                                  φ3×12
                                  18.92
                                  ≤25
                                  48~52
                                  103
                                  YR1250-8/1430
                                  1250
                                  740
                                  JDX900
                                  7.1
                                  182
                                  φ3×13
                                  18.92
                                  ≤25
                                  39~45
                                  116max
                                  YR1400-8/1430
                                  1400
                                  740
                                  JDX900
                                  7.1
                                  200.7
                                  φ3.2×11
                                  18.3
                                  ≤25
                                  45~48
                                  112max
                                  YR1600-8/1430
                                  1400
                                  740
                                  JDX900
                                  7.15
                                  213.6
                                  φ3.2×13
                                  18.7
                                  ≤25
                                  50~55
                                  133max
                                  YR1600-8/1430
                                  1600
                                  740
                                  JDX1000
                                  7.15
                                  237
                                  φ3.4×11
                                  18
                                  ≤25
                                  45~55
                                  120max
                                  YR1600-8/1430
                                  1600
                                  740
                                  JDX1000
                                   
                                  230
                                  φ3.5×13
                                  17
                                  ≤25
                                  60~65
                                  156max
                                  YR2000-8/1730
                                  2000
                                  740
                                  TS130-A-F1
                                   
                                  257.6
                                  φ3.8×13
                                  (main bearing type)
                                  17
                                  ≤25
                                  65~70
                                  190
                                  YR2500-8/1730
                                  2500
                                  740
                                  JS130-C-F1
                                   
                                  316
                                  φ3.8×13
                                  (side sliding shoe type)
                                  17
                                  ≤25
                                  65~70
                                  185
                                  YR2500-8/1730
                                  2500
                                  740
                                  DMG22/2500
                                   
                                  313
                                  φ4×13
                                  16.3
                                  ≤25
                                  78~80
                                  191
                                  YRKK900-80
                                  2800
                                  745
                                  JS140-A
                                   
                                  348
                                  φ4.2×11
                                  (main bearing type)
                                  15.8
                                  ≤25
                                  100~110
                                  182~190
                                  YR2800-8/17830
                                  2800
                                  740
                                  JS140-A-F1D
                                   
                                  350
                                  φ4.2×13
                                  (main bearing type)
                                  15.2
                                  ≤25
                                  110~120
                                  230
                                  YRKK1000-8
                                  3350
                                  740
                                  MFY355-A
                                   
                                  375
                                  φ4.2×13
                                  (main bearing type)
                                  15.2
                                  ≤25
                                  120~130
                                  245
                                  YRKK1000-8
                                  3350
                                  740
                                  MFY355-A
                                   
                                  390
                                  φ4.2×13
                                  (center sliding shoe type)
                                  15.2
                                  ≤25
                                  110~120
                                  230
                                  YRKK1000-8
                                  3350
                                  740
                                  MFY355-A
                                   
                                  380
                                  φ4.6×14
                                  15
                                  ≤25
                                  100~115
                                  285
                                  YR1000-8
                                  4200
                                  740
                                  J3160-C
                                   
                                  485
                                   
                                  Drying Raw Mill

                                  Specification
                                  (D×L)
                                  Rotary speed
                                  (r/min)
                                  Feed size
                                  (mm)
                                  capacity
                                  (t/h)
                                  Loading capacity of grinding medium
                                  (t)
                                  Main motor
                                  Main reducer
                                  weight
                                  (t)
                                  Model
                                  power(kw)
                                  Rotary speed(r.p.m)
                                  model
                                  Speed
                                  ratio
                                  φ3×(8.5+5)
                                  18.9
                                  ≤25
                                  55~53
                                  76~80
                                  YR1000-8/1180
                                  1000
                                  740
                                  JDX800
                                  6.3
                                  160
                                  φ3.2×(7+1.8)
                                  (cantilever drying)
                                  18.25
                                  ≤25
                                  50~53
                                  59
                                  YR630-8
                                  1000
                                  740
                                  JDX800
                                  6.3
                                  153
                                  φ3.5×10
                                  (cantilever drying)
                                  17.3
                                  ≤25
                                  75~80
                                  87
                                  YR1250-8/430
                                  1250
                                  740
                                  JS110-A-F1
                                   
                                  214
                                  φ3.6×(7.5+1.5)
                                  17.3
                                  ≤25
                                  90~95
                                  98
                                  YRkk710-8
                                  1400
                                  740
                                  JDX900
                                  7.1
                                  220
                                  φ3.8×1.2
                                  16.6
                                  ≤25
                                  133
                                  100~110
                                  YR800-8
                                  2000
                                  740
                                  JS130-A
                                   
                                  295
                                  φ4.6×(9.5+3.5)
                                  15
                                  ≤25
                                  185
                                  175~180
                                  YRkk1000-8
                                  3550
                                  740
                                  MFY355A
                                   
                                  415

                                   
                                  wet process raw mill

                                  Specification
                                  (D×L)
                                  Rotary
                                  speed
                                  (r/min)
                                  Feed size
                                  (mm)
                                  capacit y(t/h)
                                  Loading capacity of grinding medium
                                  (t)
                                  motpr
                                  Main reducer
                                  weight
                                  (t)
                                  type
                                  power(kw)
                                  rotary speed(r.p.m)
                                  type
                                  Speed ratio
                                  φ2.2×7
                                  21.4
                                  ≤3
                                  20~25
                                  31
                                  YR148-8
                                  380
                                  740
                                  ZD70-9
                                  5
                                  49
                                  φ2.2×13
                                  21.6
                                  ≤25
                                  33~37
                                  58~60
                                  YR630-8/1180
                                  630
                                  740
                                  MBY630
                                  5.6
                                  53.4
                                  φ2.4×13
                                  21
                                  ≤25
                                  45~50
                                  65~70
                                  YR800-8/1180
                                  800
                                  740
                                  JDX710
                                  5.6
                                  131
                                  φ2.6×13
                                  20
                                  ≤25
                                  45~46
                                  80t(max)
                                  YR1000-8/1180
                                  1000
                                  740
                                  TDX800
                                  6.3
                                  153
                                  φ6.2×6.4
                                  18.5
                                  ≤25
                                  32~41
                                  86~90.5
                                  TDMK1000-36
                                  1000
                                  740
                                   
                                   
                                  134

                                   
                                  Dry process Raw mill

                                  Specification
                                  (D×L)
                                  Rotary
                                  speed
                                  (r/min)
                                  Feed size(mm)
                                   
                                  capacity
                                  (t/h)
                                  Loading capacity of grinding medium
                                  (t)
                                  motor
                                  Main reducer
                                  weight
                                  (t)
                                  model
                                  power(kw)
                                  Rotary spee d(r.p.m)
                                  model
                                  Speed
                                  ratio
                                  φ2.4×8
                                  20.91
                                  ≤25
                                  25~28
                                  39~42
                                  JRQ1512-8
                                  570
                                  740
                                  ZD80-9
                                  5
                                  76.4
                                  φ2.4×10
                                  20
                                  ≤25
                                  open27~30
                                  closed38~40
                                  50
                                  YR710-8/1180
                                  710
                                  740
                                  JDX630
                                  5.6
                                  111
                                  φ2.4×11
                                  21
                                  ≤25
                                  open41~42
                                  closed46~48
                                  62~65
                                  YR800-8/1180
                                  800
                                  740
                                  MBY710
                                  6.3
                                  125
                                  φ2.4×12
                                  21
                                  ≤25
                                  open40~42
                                  closed45~48
                                  63~65
                                  YR800-8/1180
                                  800
                                  740
                                  MBY710
                                  6.3
                                  127
                                  φ2.4×13
                                  21.5
                                  ≤25
                                  48~51
                                  68~72
                                  YR800-8/1180
                                  800
                                  740
                                  MBY710
                                  6.3
                                  131
                                  φ2.6×8
                                  20
                                  ≤25
                                  30~35
                                  54
                                  YR630-8/1180
                                  630
                                  740
                                  JDX630
                                  5.6
                                  135
                                  φ2.6×10
                                  20.91
                                  ≤25
                                  45~46
                                  80
                                  YR1000-8/1180
                                  1000
                                  740
                                  JDX710
                                  6.3
                                  136
                                  φ3×9
                                  19.13
                                  ≤25
                                  50~55
                                  76~80
                                  YR1000-8/1180
                                  1000
                                  740
                                  JDX800
                                  6.3
                                  145
                                  φ3.2×7
                                  18.25
                                  ≤25
                                  50~52
                                  58
                                  YR1000-8/1180
                                  1000
                                  740
                                  MBY800
                                  6.3
                                  140
                                  φ3.2×9
                                  18.3
                                  ≤25
                                  60~70
                                  90
                                  YR1250-8/1430
                                  1250
                                  740
                                  JDX900
                                  7.1
                                  175
                                  φ4.6×10+3.5
                                  15
                                  ≤25
                                  195
                                  190
                                   
                                  3550
                                  740
                                  JS150-B-F
                                   
                                  476

                                  wind swept mill
                                  Specification
                                  (D×L)
                                  Rotary
                                  speed
                                  (r/min)
                                  Feed size
                                  (mm)
                                  (t/h)
                                  capacity
                                  Loading capacity of grinding medium
                                  (t)
                                  Motor
                                  Main reducer
                                  Weight
                                  (t)
                                  Model
                                  Power(kw)
                                  Rotary speed(r.p.m)
                                  Type
                                  Speed ratio
                                  φ2.2×4.4
                                  22.4
                                  ≤25
                                  8~9t/h
                                  18t
                                  YRKK4501-6
                                  250
                                  986
                                  ZD60-11
                                  6.3
                                  36.7
                                  φ2.2×5.8
                                  22.4
                                  ≤25
                                  5.5~7
                                  23.5~25
                                  Y4005-8
                                  280
                                  750
                                  ZD70-10
                                  5.6
                                  45
                                  φ2.4×4.75
                                  21.2
                                  ≤25
                                  14
                                  22~24
                                  YR4501-8
                                  315
                                  740
                                  ZD60-8
                                  4.5
                                  49
                                  φ2.4×4+2
                                  20.2
                                  ≤25
                                  10~11
                                  19
                                  YRKK450-8
                                  250
                                  740
                                  ZDY355
                                  4.5
                                  60
                                  φ2.4×4.5+2
                                  20.2
                                  ≤25
                                  10~12
                                  20.8
                                  YRKK500-8
                                  280
                                  740
                                  JDX45
                                  4.5
                                  68
                                  φ2.6×(5.25+2.25)
                                  19.7
                                  ≤25
                                  9~10
                                  28
                                  YRKK500-8
                                  400
                                  740
                                  ZDY450
                                  4.5
                                  87.4
                                  φ2.8×(5+3)
                                  18.7
                                  ≤25
                                  13~13.5
                                  32
                                  Y5001-8
                                  500
                                  740
                                  JDX560
                                  4.5
                                  102
                                  φ2.9×4.7
                                  19.1
                                  ≤25
                                  14~19
                                  34.4
                                  YR560-8
                                  500
                                  743
                                  MBY560
                                  5.6
                                  79

                                  ===========================================================================================================================================

                                       Jiangsu Pengfei Group Co., Ltd has the great comprehensive ability to provide the best quality services on turn-key basis with the complete equipment、 the installation and the debugging for the new type dry process rotary kiln cement factories under the daily capacity of 8000ton、5000ton and 2500ton and compound fertilizer plants under the annual capacities of the 300000ton. The “Pengfei” brand rotary kiln cement complete equipment have been sold exported to Russia、The Kingdom of Denmark、Germany、kazakhstan、Mongolia、Ukraine、Uruguay、uzbekistan、 Bangladesh、Pakistan、Laos、Peru、India and so on . MD export project are X18, X519, Son La, Lang Son, Da Ye, Chai Shai Cement factories in Vietnam, Tiger-Head, King Elephant Cement Plants in the union of  MD and so on . All of these cement complete equipment production line have been widely praised by the international friends.
                                         The key words are : Jingsu Pengfei Groupcement machinerycement equipmentcement machinery equipment、cement complete equipmentcement machinery complete equipment、mining equipment、Tube mill、Ball mill、Cement mill、Coal mill、Slag mill、Raw mill、Mining mill、vertical mill、roller press 、grinding equipment. The leading products are the cement machinery equipment such as  the “Pengfei” brand rotary kilnball millTube millCement mill、Coal mill、Slag mill、Raw mill、Mining mill、cooler、vertical millroller press、grinding equipment、conditioning tower、dust collector、shaft mill、rolling machine、drier、crusher and conveyor and so on.
                                  Ohter Products
                                  Tube mill
                                  Cement Mill
                                  Ball mill|PMG series high efficient ball mill
                                  dia.2.6*13m Super fine slag mill
                                  dia. 3.2*13m Slag mill
                                  dia. 3.5*10m raw mill
                                  dia. 3.8*(7.5+1.5)mRaw mill
                                  dia. 4.2*13m Center driving Cement mill
                                  dia. 4.2*13m Cement mill
                                  Φ4.2×13m Cement mill ( Single edge double driving )
                                  diameter 4.2*14.5m cement mill
                                  dia.4.2*15m cement mill
                                  M42130 Cement mill Technical performance
                                  dia. 4.6*(10+3.5)m Middle discharging raw mill
                                  dia.4.4*13.5m cement mill
                                  Technical performance of φ4.6×14.5m cement mill
                                  dia. 4.6*15.5m cement mill
                                  PRM Type Vertical Roller Pressure Mill
                                  φ3.2×13m cement mill(side drive)technical parameter
                                   打印本页 [ 关闭窗口 ] 向上
                                  Copyright © Jiangsu Pengfei Group Co.,Ltd. All Rights Reserved.
                                  超神计划团队